Filter
Top Products
4. Hotkey Operation
15
When you use the port switching hotkey or HSM, the mouse cursor must be in
the current computer display.
While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are
suspended – only Auto Scan Mode compliant keystrokes and mouse clicks can
be input. You must exit Auto Scan Mode (press the Esc key or the Spacebar)
in order to regain normal control of the console.
Video DynaSync
Video DynaSync is ATEN’s exclusive technology that eliminates boot-up
display problems and optimizes resolution when switching between ports.
To manually detect and remember monitor EDIDs, do the following:
1. Invoke HSM (see page 13).
2. Press [D] or [d] [Enter].
Note: If the monitor is disconnected and reconnected, the CS72D / CS74D
re-executes Video DynaSync.
Mouse Emulation Control
The default setting is enabled. To disable, do the following:
1. Invoke HSM (see page 13
).
2. Press [M] or [m] [Enter].
This procedure is a toggle. Repeat to enable.