Filter
Top Products
6. The Firmware Upgrade Utility
27
Upgrade Succeeded
After the upgrade has completed, a screen appears to inform you that the
procedure was successful:
Click Finish to close the Firmware Upgrade Utility.
After a successful completion, the CS72D / CS74D exits Firmware Upgrade
Mode, and resets itself.
Upgrade Failed
If the Upgrade Succeeded screen doesn’t appear, it means that the upgrade
failed to complete successfully, in which case you should do the following:
1. Power off the CS72D / CS74D by removing the power jack.
2. Invoke Firmware Upgrade Mode by holding down the front panel Port 1
pushbutton (see page 23) and power on the CS72D / CS74D. Check the
front panel LEDs – see page 24 for LED behavior details.
3. Do the firmware upgrade procedure again.