Filter
Top Products
M
Selecting the Active Port - Default Method:
The default method to toggle the KVM focus between the two
ports from the keyboard is to tap the left or right Ctrl key twice:
[Ctrl] [Ctrl]
Note: The combination must be on the same side (both Left, or
both Right).
M
Selecting the Active Port - Alternate Method:
If the Ctrl key combination conflicts with programs running on
your computer, you can switch the hotkey to the Scroll Lock key
by pressing and holding both Port Selection buttons for three
(3) seconds. After this, tap the Scroll Lock key twice to toggle
the KVM focus.
[Scroll Lock] [Scroll Lock]
Note: To switch back to the default hotkey, press and hold the
Port Selection button for three (3) seconds again.
- 9 -
2003-11-25