Filter
Top Products
Chapter 6. Out of Band Operation
61
PPP (Dial In) Connection
This type of connection works directly through the COM port.
Direct PPP Connection
Setup:
To set up a direct PPP connection, do the following:
1. Use Ethernet cable a DTE-to-DTE adapter to connect one of the SN0108 /
SN0116's serial ports to a COM port on a PC (refer to SN0108 / SN0116
PC Installation, page 11 or SN0108D / SN0116D PC Installation, page 13,
if necessary).
Note: 1. See RJ-45 to Serial Adapters, page 92, for details on choosing the
adapter. The usual choice for connecting to a PC is SA0141.
2. In the examples that follow we use COM1. If you use a different
COM port, change the settings accordingly.
2. On your PC, run the Make New Connection setup program:
Start → Programs → Accessories → Communications →
Make New Connection
The following dialog box appears:
3. Key a descriptive name for the connection in the top text box; select
Standard 28800 bps Modem for the device; then click Configure.
sn816.book Page 61 Thursday, December 13, 2007 5:16 PM