ATEN Technology PE7324 Power Supply User Manual


 
31
Chapter 2
Hardware Setup
Before You Begin
Rack Mounting
The eco PDU can be mounted in a 0U configuration on the side of a rack. To
rack mount the device, use the rack mounting brackets that came with your
device. The brackets can be mounted either near the top and bottom of the back
panel, or the top and bottom ends of the device, as shown in the diagram below:
1. Important safety information regarding the placement of this device is
provided on page 76. Please review it before proceeding.
2. Make sure that power to all the devices you will be connecting have
been turned off. You must unplug the power cords of any computers
that have the Keyboard Power On function.
3. See Resetting the Circuit Breaker, page 79 for important information
about resetting a tripped circuit breaker.