Filter
Top Products
12 ATI Displays Tab
To enable or disable a display
If the enable/disable button is green, it indicates the device is enabled. If it
is red, it indicates the device is disabled. If the button is greyed out, the
device is not an option. For example, if there is only one monitor
connected, all buttons will be grey.
1
Click the enable/disable button for the display device you
want to enable/disable.
2
Click OK or Apply to save the changes.
Note: Due to power restrictions, you can normally only have two
devices active at the same time; for example, two monitors or a
monitor and a TV.
To save a display-device scheme
Display-device selections can be saved as a scheme for quick recall.
1
Click the enable/disable button for the display devices you
want to have active.
2
Type a name into the Scheme drop-down list field.
3
Click Save to save the scheme.
Dynamic Display Reassignment
You can change the assignment of your Primary and Secondary display on
the fly, without rebooting.
Note: Before you can change the assignment of the Primary display,
at least one Secondary display and the Extended Desktop mode must
be enabled. Extended Desktop mode is enabled through the
Windows®
Display Property dialog, under Settings. For more
information, consult your Windows®
documentation.
To assign your Primary monitor
1
Click the buttons to assign the Primary monitor:
Troubleshoot
button
Opens a Troubleshoot dialog to assist with possible
display problems.
ATI Displays Tab