Filter
Top Products
ENGLISH
19
• Fax Group 3, Class 1 (14.400 bps)42
• V.80/H.324 P
• Error Correction V.42/MNP 2-4
1.4 Hardware Requirements
Make sure that you have all you need to install the WebRunner r USB. You
should have the following:
• A PC that has USB connector and its USB controller is working
properly as shown below
• Microsoft Windows 98SE, ME,2000 or XP
• Linux OS (kernel 2.4 e kernel 2.6)
• At least 10MB of free disk space for the driver and software
• Intel® Pentium® 233 Mhz or compatible processor with 128MB
RAM with CDRom drive
1.5 Connecting The Modem To Your Computer
The WebRunner USB Modem is a Plug’n’Play device. You may connect
your modem to your computer anytime without having to power down your
system. Connect as follow and your Windows will immediately detect the
new hardware and prompt for its driver. Connect one end of the telephone
extension cable to the LINE jack on Modem and the other end to your
Telephone Wall Socket. Connect the USB cable of the Modem to the USB
port on your computer. This completes the modem connections. Please
proceed to driver/utility installation.