Filter
Top Products
ENGLISH
23
1.8 Advanced Configuration
Smart Link modem drivers install two control applets Windows control panel
as follows:
• Modem Settings: provides access to the Modem country Setting and
other information about the
• V.92 Features Setting: provides control over V.such as Quick
Connect and Modem on Hold
Modem Settings
When you double click on the Modem Settings icon you will see the first
tab, configuration. Here you can see/change the modem country setting
and see the modem software (driver) version. You can also access the
other tabs: Modem Helper, Speaker, More
If you click on the Modem Helper tab you will see the Modem Helper
Launcher screen.This screen guides user’s in debugging simple modem
problems. If these guidelines to not help, then the user can enter the
Modem Helper Application from the Modem Helper button above.
If You launch Modem Helper Application you can enter a telephone number
of the ISP and start the Modem Helper self test which will test the hardware,
phone line and ISP. You start the test by clicking on the arrow in the lower
left hand corner of the screen. The More tab shown below provides more
information about your modem hardware.
V.92 Features Setting
The V.92 Feature Setting application provides control over various V.92
features. When launched you will see the V.92 Feature tab.
This tab provides the ability to enable/disable Quick Connect as well as to
clear the Quick Connect memory. When you click on the Clear Data button
the next V.92 connection will be forced a non Quick Connect connection. All
V.92 connection attempts after that will be Quick Connect connections.
This tab also provides the ability to enable/disable V.44 Compression.