Filter
Top Products
26-Port Dual Web Rack Switch
5
Combine the Switch with the provided screws
Then, use screws provided with the equipment rack to mount each switch in the rack.
Mount the Switch in the rack
2.4 Connecting Network Cable
The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and it runs both in half and full
duplex mode using two pair of Category 5 cable.
The Switch also supports 2-Ports 1000Mbps Gigabit Ethernet that runs in Auto-negotiation mode and
10Mbps Ethernet or 100Mbps Fast Ethernet that runs both in half and full duplex mode and 1000Mbps
Gigabit Ethernet runs in full duplex mode using four pair of Category 5 Cable.
These RJ45 ports are Auto-MDI type port. The Switch can auto transform to MDI-II or MDI-X type,
so you can just make an easy connection that without worrying if you are using a standard or crossover
RJ45 cable.
There are additional two mini-GBIC ports for optional mini-GBIC module.
Product Code A02-MSW2(Fiber module)
Description Giga Ethernet Fiber Module
Standards 1000BASE-SX
Network Media
50µm or 62.5µm multimode optical fibers
Connector LC