Filter
Top Products
26-Port Dual Web Rack Switch
17
This setting determines whether or not the Switch will be handling flow control. Set FlowCtrl to
Enable for avoiding data transfer overflow. Or it sets to Disable; there is either no flow control or
other hardware/software management.
When the port is set to forced mode, then the flow control will automatically set to
Disable.
Sending packets between two groups may cause packet lost
QoS:
In some ports that need to have a high priority to manage the data transfer, QoS should be change. Set
the port’s QoS to high to determine the port will always transfer their data first.
VLAN Settings (Virtual Local Area Network)
Group individual ports into a small “Virtual” network of their own to be independent of the other
ports. To add a VLAN group, press “Add Group” button, the new VLAN configuration window will
pop out, you can fill in the description in order to describe this VLAN Group, check on the port to be a
member to this VLAN Group, and press “Apply” button to execute the setting.
There are two group for VLAN Setting, each group have fixed setting to choose, check on the port to
be a member to the VLAN Port Group 1 or Port Group 2, and press “Apply” button to execute the
setting.
Once you want to modify the VLAN Group, check on the ID parameter, the ID VLAN configuration
window will pop out.