Filter
Top Products
WIRELESS PCI ADAPTER
• Power off the computer, and then remove the
computer cover. Locate the available PCI slot
on your main board.
•
Put the Adapter directly over the PCI slot and
press it into the slot firmly.
• Replace the computer cover after securing the
Adapter with a bracket screw.
•
Connect the external antenna to the connector
on the Adapter’s bracket.
•
Power on your PC.
1.4. Driver and Utility Installation
This section describes the procedures of installing the driver
and utility. Follow the instruction step by step to finish the
installation. If you use Windows® 98SE/ME, please prepare
the Windows® Setup CD at hand before installing the driver;
because the system will ask you to insert the Setup CD to
copy files during the installation.
1.4.1 Installing on Windows 98SE/ME
•
Start Windows. Insert the driver CD into your
CD-ROM drive. After the opening banner,
Windows will tell you that the new device has
been detected. You will then see the following
screen. Click “Next >”.
• In the next window, select “Search for the best
driver for your device” and click “Next >”.
•
Check “Specify a location”. Click “Browse…”
to specify the driver directory such as
CDRom:\PCI\Drivers\Windows98\ (or
CDRom:\PCI\Drivers\WindowsME) for
installing Wireless PCI Adapter . Click “OK” and
then “Next>” to continue.
• When the installation is completed, click «Finish
button.