Filter
Top Products
WIRELESS PCI ADAPTER
1.4.2 Installing on Windows 2000/XP
• Start Windows. Insert the driver CD into your
CD-ROM drive. After the opening banner,
Windows will tell you that the new device has
been detected. You will then see the following
screen. Click “Next >”.
•
Select “Search for a suitable driver for my
device” (In Windows XP select “Install from a
list or specific location”). Click “Next>”. In next
window, check “Specify a location” and click
“Next>”.
• Click “Browse…” to specify the driver directory
such as CDRom:\PCI\Drivers\Windows2000\
(or CDRom:\PCI\Drivers\WindowsXP) for
installing Wireless PCI Adapter . Click “OK” and
then “Next>” to continue.
•
When windows titled “Digital Signature Not
Found” appear, press “Yes” to continue the
installation.
• When the installation is completed, click Finish
button.
1.4.3 Utility
Go to your Windows Start menu and choose Run, type
“CDRom:\PCI\Utility\Setup.exe” in the dialog box and click
OK.
After finish the installation, plugged in the Wireless PCI
Adapter, you will see Wireless Configuration Utility Country
Selector, select the country where you are using this
Wireless device, users are responsible for ensuring that the
channel set configuration is in compliance with the
regulatory standards of these countries.
Warning: Be noted that selecting the incorrect region may
result in a violation of applicable law; you will need to select
the correct domain.