Filter
Top Products
xv
ATTO Technology Inc. FibreBridge Installation and Operation Manual
TimeZone
Controls/displays the time zone if
SNTP
is disabled.
Setting may be EST, CST, MST PST or a numerical offset
from GMT in the format +/- HH:MM. When
SNTP
is
enabled, applies the time zone setting to the time retrieved
from a specified SNTP time server to determine local
time.
Default: EST
set TimeZone [EST | CST | MST | PST | [+ / - HH : MM]]
Requires a SaveConfiguration command
get TimeZone
TraceLog
When enabled, records various system events to the trace
log.
Default: disabled
set TraceLog [enabled | disabled]
get TraceLog
TraceLogFilter
Filters the display of data for specific FibreBridge ports
when
TraceLog
is enabled.
Default: all all all
set TraceLogFilter [FC | SCSI | all] [fp | sb | all] [none |
ChkCond | all]
get TraceLogFilter [FC | SCSI | all] [fp | sb | all ]
Username
Specifies user name for all Telnet, FTP and ExpressNAV
user management console sessions.
Username
is case
insensitive, 1-32 characters, no spaces
Default: root
set Username
Requires a SaveConfiguration command
get Username
VerboseMode
Specifies the detail of feedback for the command line
interface. Disabling this option removes parameter
names from action commands and removes descriptions
from information commands.
Default: enabled (returns have parameter information)
set VerboseMode [enabled | disabled]
get VerboseMode
VirtualDriveResponse
Provides proxy responses to SCSI INQUIRY and TEST
UNIT READY commands if a SCSI device is in a timeout
or busy. Host systems may then assign devices
consistently despite the device’s state during execution of
SCSI commands.
Default: disabled
set VirtualDriveResponse [enabled | disabled]
Requires a SaveConfiguration restart command
get VirtualDriveResponse
VirtualRobotResponse
Provides proxy responses to SCSI INQUIRY commands if
an existing SCSI command is outstanding to a Media
Changer. All other SCSI commands are returned with a
NOT READY check condition.
Default: disabled
set VirtualRobotResponse [enabled | disabled]
Requires a SaveConfiguration restart command
get VirtualRobotResponse
Voltage (FB2350, FB2400 only)
Displays the voltage levels monitored by the FibreBridge.
VDDA: +3.31 V
VDDB: +2.49 V
VDDC: +1.5V
VDDD: +1.35V
ALL: all monitored voltages
get Voltage [VDDA | VDDB | VDDC | VDDD | all]
WrapEventLog
When enabled, the FibreBridge logs up to 2,048 event
entries before wrapping (overwriting the first entries). If
disabled, the FibreBridge stops logging event entries
when the buffer is full.
Default: enabled
set WrapEventLog [enabled | disabled]
Requires a SaveConfiguration command
get WrapEventLog
WrapTraceLog
When enabled, the FibreBridge logs up to 2,048 trace
entries before wrapping (overwriting the first entries). If
disabled, the FibreBridge stops logging trace entries
when the buffer is full.
Default: enabled
set WrapTraceLog [enabled | disabled]
get WrapTraceLog