Filter
Top Products
The Materials included in this package:
-1-
1. LCM500NP Monitor (1pc)
2. Remote Control Unit (1pc)
3. Interconnection Box (AVX-6865) (1pc)
4. Monitor Cable Assembly 16 Feet (5 Meters) (1pc)
5. Power Cable Assembly (1pc)
6. Surface Mount (S2) (1pc)
7. Headrest Shroud (1pc)
8. Trim Ring For Shroud (1pc)
9. Removal Tool (1pc)
LCM500NP SYSTEM OVERVIEW
The LCM500NP is comprised of a 5" Thin Film Transistor (TFT) Liquid Crystal Display ( LCD)
monitor. The monitor display is a widescreen display (16:9 Aspect Ratio ) that allows the user
to select from two video sources (Not Supplied). The housing has a built-in location for the
installation of an optional infrared audio transmitter ( Audiovox IRT 456, IRT 457) for use with
optional two channel wireless headphones. The monitors will display all functions with the
comprehensive On Screen Display (OSD).
OPTIONAL AUDIO CONNECTION
Required Materials:
1. IRT456 (CHA) Infrared Transmitter (1pc)
2. IRT457 (CHAB) Infrared Transmitter Remote (1pc)
3. WHS200 Two Channel Infrared Headphones
Before installing the IRT boards gently bend the three IR LEDs closest to the center of the
vehicle toward the center of the vehicle.
IRT 456 CH A BEFORE
IRT 457 CH B BEFORE
IRT 457 CH B AFTER
IRT 456 CH A AFTER
Insert the IRT boards into their respective compartments in the monitor housing and insert the plug
into the IRT board. When the user switches the video source utilizing the ON/OFF/MODE switch,
the A/B switch on the WHS200 headphones must also be switched to select the desired audio
source.