Avaya 2600 Switch User Manual


 
TMA; Reviewed:
SPOC 7/21/2008
Solution & Interoperability Test Lab Application Notes
©2008 Avaya Inc. All Rights Reserved.
9 of 21
ProCurve-ACM
5. Create and configure the telephony VLAN where all of the Avaya telephony equipment will
run.
Assign a VLAN ID for the telephony VLAN.
Assign a name for the telephony VLAN.
Assign an IP address for the telephony VLAN.
Assign ports to the telephony VLAN.
Assign a QoS priority to the telephony VLAN.
Note: The commands identified with an “*” below are required when connecting an
Avaya G700 Media Gateway to a ProCurve 5406zl Switch with J8177C Transceiver.
Auto negotiation for the associated port must be set to auto-100. The Avaya G700 Media
Gateway is auto-100 by default and requires no change. The port on the ProCurve 5406zl
Switch (port a21 in this example) is a GigE port and needs to be changed from the default
of auto-1000 to auto-100.
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# vlan 10
ProCurve Switch 5406zl (vlan-10)#vlan 10 name vlan10
ProCurve Switch 5406zl (vlan-10)#ip address 10.1.1.254/24
ProCurve Switch 5406zl (vlan-10)# untagged a4,a10,a21
ProCurve Switch 5406zl (vlan-10)# qos priority 6
ProCurve Switch 5406zl (vlan-10)# exit
* ProCurve Switch 5406zl# configure
* ProCurve Switch 5406zl(config)# interface a21
* ProCurve Switch 5406zl(eth-A21)# speed-duplex auto-100
6. Create and configure the voice VLAN that will run between the control room and closets.
Assign a VLAN ID for the voice VLAN.
Assign a name for the voice VLAN.
Assign voice option.
Assign an IP address for the voice VLAN.
Set an IP helper address for DHCP.
Assign ports to the voice VLAN.
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# vlan 33
ProCurve Switch 5406zl (vlan-33)#vlan 33 name Voice1
ProCurve Switch 5406zl (vlan-33)# voice
ProCurve Switch 5406zl (vlan-33)#ip address 10.33.1.254/24
ProCurve Switch 5406zl (vlan-33)# ip helper-address 10.20.20.250
ProCurve Switch 5406zl (vlan-33)# tagged a11-a12,trk1
ProCurve Switch 5406zl (vlan-33)# exit