Filter
Top Products
4-2
Residential Gateway-I - Getting Started Guide
Using your Residential Gateway-I - General Guidelines
■ The Residential Gateway-I unit can be cleaned with a soft tissue. To
avoid damage, do not use aggressive liquids like alcohol or acetone. Do
not rinse the unit with fluids.
■ The Residential Gateway-I consumes very little power. In order to extend
the life of your Residential Gateway-I it is better to leave the unit powered
on.
Wall Mount the Residential Gateway-I
If you want to mount the Residential Gateway-I to the wall proceed as
follows:
1. Remove the cover (page 2-2).
2. Use a sharp pointed object (like a small screwdriver) to open the three
cover screw holes marked
a in Figure 4-1.
Figure 4-1 Punch Screw Holes and Mount the Residential Gateway-I to a
Wall