Filter
Top Products
4-4 Operator’s Handbook
Printing a Diagnostics Label
The diagnostics label shows the printer’s software and
firmware versions and Ethernet information.
1. Press
.
2. Enter the Manager Password and press Enter.
The default password is 1234. The Configure
screen appears.
Note: This screen may appear differently on the
single printer version.
3. Press Print Diag Label. A diagnostics label prints.
Control # QL009-1
Software # 127459
Software Ver 2.0
Firmware Ver 2.5
IP Addr 192.0.0.192
Subnet 255.255.0.0
Gateway 192.0.0.192
A
very Dennison
Model 9415
Sample Diag Label