Filter
Top Products
Getting Started 1-5
Loading Labels
Dual printer: Printer 1 is located on the left and
Printer 2 is located on the right. Printer 1 is the
default printer for all categories and formats.
Single printer: Printer 1 (located on the left) is the
only available printer. There is no option to assign a
format to a printer.
The first time you load the printer after receiving it you
must remove and discard the thermal paper from the
printer slots.
1. Turn on the printer. Press the power switch on the
side of the printer to the on (I) position.
2. Press
to remove the thermal paper from the
printer, if necessary.
3. Remove and discard the tape from a new roll of
labels.
4. Lower the supply door.
5. Slide a roll of labels onto the supply holder.
If necessary, adjust the supply holder guide so it
touches the roll.
6. Feed the labels, printing side up, into the supply
slots in the supply door.
Note: Make sure no label adhesive is exposed when
loading labels. This causes jams.