Filter
Top Products
Instruction 24-9422 7
IrDA Printer
4. Press the SEL button to print the next parameter; then, if necessary,
use the FEED button to change that parameter to the desired value.
5. Once all parameters have been set, press and hold down the SEL
button then press the FEED button.
Using the Printer
Turn ON the printer and, if necessary, set it up as previously described
under the heading Set-Up Mode. Also ensure that the instrument that is
sending data to the printer is set up to operate in its IrDA print mode
(refer to the instrument’s instruction manual for set up information).
Align the printer’s infrared sensor to that of the instrument and begin
printing as described in the instrument’s instruction manual.
Operation