Baracoda BBR-LA Barcode Reader User Manual


 
Data Capture for
Workforce in Motion
The bluetooth name and Bluetooth registered trademarks are owned by Bluetooth SIG, Inc., and are used by Baracoda under license. The Baracoda names and
Baracoda trademarks are own by Baracoda. All specifications are subject to change without notice - Non contractual pictures © Baracoda - All rights reserved
Baracoda, Inc. (US Office) Baracoda SA (Europe Office: France)
45 Main street - Suite 616 - Brooklyn, NY 11201 30 Avenue de l’Amiral Lemonnier - 78160 Marly-Le-Roi
Ph: 718 488 9600 - Fx: 718 488 9601 Ph: +33 1 30 08 89 00 - Fx: +33 1 30 08 89 98
© Baracoda™ - November 2007
RoadRunners BRR-L & BBR-LA Programming Guide
Important notice
Every effort is made to ensure the accuracy of
our product information; however, we accept no
responsability for errors or omissions including, but not
limited to, the implied warranties of merchantability and
fi tness for a particular purpose. We shall not be liable for
errors contained herein or for incidental consequential
damages in connection with the furnishing, performance,
or use of this material.
Specifi cations or version may be subject to change
without notice. The actual specifi cation and version are
based on the product delivered.
Introduction
Scanning a series of programming bar code labels can
confi gure the scanner.
The scanner must be properly powered before programming.
The scanner will acknowledge a good and valid programming
barcode label reading with two beeps and a green
enlightening. It will give two other beeps (lower tone) and
a red enlightening of the RSL led for either an invalid or
bad reading.
Please do not read the programming barcodes while being
connected to the BaracodaManager.
PROGRAMMING OPTIONS:
Programmable options are divided into 2 groups. The first
groups includes the options that show the general behaviour
of the scanner. The second group sets the decoding
parameters for each barcode symbology.