Filter
Top Products
RoadRunners BRR-L & BRR-LA Programming guide Nov 2007
© Baracoda 2007 4/29
2/ General Configuration
2.1/ Reset all parameters:
The reading of the "Default settings” label turns all the parameters of the BRR-L back to default settings and
switches it off.
Reset to factory defaults
2.2/ Erase all barcodes in memory
The RoadRunners has the ability to store barcodes in its internal memory (both in batch mode and in Real Time
with “No Data Loss Mode” ON). By reading the following barcode you will empty the internal memory of the
scanner.
Empty memory
2.3/ Baracoda advanced features
2.3.1/ Switch on delay
In order to switch on the BRR-L in its standard mode, you should just press the trigger. You can set up the
scanner to be switched on only after keeping the trigger pressed for two seconds by reading the appropriate
barcode.
Switch on delay : 2 seconds
Switch on delay : 0 second (*)