Filter
Top Products
22 MatrixPRO- II
SELECT button. The UP and DOWN buttons can then be used to scroll through the input adjustment
options and press select to choose one of the following options.
AUDIO TYPE
The user can, after selecting an input, adjust the parameters for that input. The user may scroll down
to AUDIO TYPE and select between PRO for profession, and CON for consumer types of audio
input. AUDIO TYPE is only available on units with the audio option.-
INPUT TRIM
The user may choose to adjust the audio INPUT TRIM. It may be desirable that the input’s audio
be connected to an output audio, so the user can hear the adjustment. The range of the input trim
will be –10dB to +10dB in one dB increments. The user scrolls down to INPUT TRIM and presses
SELECT. The user uses the UP and DOWN buttons to change the input’s trim value. The front panel
will send an Input Trim value message to the rack each time the value is changed so the user can
hear the difference. INPUT TRIM is only available on units with the audio option.
VIDEO TYPE
A unique feature of the MatrixPRO-II series is the ability to confi gure inputs (and outputs) for not
only the default source type, but also be able to split the port in order to input other source types.
When an input is set to split mode, an RGB matrix port can be confi gured as:
One RGB port, (Default) •
One Component video•
One S-Video and one composite•
Three Composites. •
The ports will default to RGB.and NATIVE for the VIDEO TYPE.
If the user wishes to split an input in order to use another video type(s), the user positions the cursor
to VIDEO TYPE and presses SELECT. The user can toggle between NATIVE and SPLIT by using
the up and down buttons.
If the input is split and the user selects NATIVE, the front panel will simply return to the default
video setting of RGB.
If the user chooses SPLIT , and presses the SELECT button, the screen will change to allow the user
to scroll through and select one of fi ve pre-defi ned split confi gurations. The screen will look like this: