Filter
Top Products
MatrixPRO-II 3G/HD/SD-SDI Routers Rev. 1.1
MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1
22
5.2 Ethernet connection
The connections follow the standard set by the IEEE 802.3 100BaseTX specification. The
cables that are to be applied should be CAT-5 / CAT-5E standard, or better. It is the
responsibility of the installer / user to secure a proper installation of the Ethernet
connection.
All Barco MatrixPRO-II routers and IP-based Control Panels are connected together through
an Ethernet Switch.
A Barco MatrixPRO-II device has only one physical Ethernet connection. If redundant control
is required, this limitation has to be solved by the control system.
The default IP address is: 192.168.0.245 port: 4381
Connection to the router will be lost after 20 seconds of inactivity