Barco 1218 Computer Monitor User Manual


 
MFCD 1218 User's Guide 11
2.4 Starting up
Proceed as follows:
1 Switch on the computer.
2 Switch on the display by pushing the Power
key (9).
3 If necessary, select a suitable resolution in
the computer operating system. Please refer
to Appendix A, "Possible resolutions" in the
back of this manual.
Note: The recommended resolution for best
image quality is 1280x1024 at 60 Hz.
The microcontroller in the display checks if the
connected video signal has been adjusted before,
and if these adjustments have been stored in the
memory. There are 2 possibilities:
a) The video signal has been adjusted and
stored in the memory.
In this case, the display switches to this memory
location (the so-called mode) and the image will
need no further adjustments.
b) The video signal has not been adjusted and
stored yet.
In this case, the display will auto-size the picture
and store the settings in one of the user modes.
2.5 Install the DICOM Optimizer software
Proceed as follows:
Install the CD-ROM in the CD-ROM drive. The
CD-ROM starts automatically. Please follow the
instructions on the screen.
The CD-ROM contains user instructions about the
usage of the DICOM Optimizer.
(9)