Filter
Top Products
26 Display Controller
Installing the BARCO MXRT drivers and
software
This process applies to the following versions of Windows:
• Windows 7 32 & 64 Bit
You will need to install the B
ARCO DISPLAY CONTROLLER system drivers and
software in the following cases:
• After you have installed the Barco display controller(s) for your
Barco Display System in your system for the first time.
• After you have reinstalled or upgraded your operating system.
• When you upgrade to a newer version of the MXRT driver.
You do not need to manually uninstall an existing driver before
updating to the current version. The Barco Product Installation
Wizard will detect any prior installations and start the
uninstallation process automatically if necessary.
When there is a non-Barco board in the system, we recommend
that you first install the driver for the non-Barco board, prior to
installation of the Barco driver. After each driver installation, you
should reboot the system, before proceeding with installation of
another driver.
The following will guide you through the installation procedure:
1 Start your system. If you have a fresh OS installation, the OS will
automatically install an ATI driver (Windows 7 inbox driver) for the
Barco MXRT Graphics Card(s). When the OS prompts you to restart
your computer, click yes, to allow the automatic driver installation
to complete, and reboot the system.
2 Launch the Barco Product Installation Wizard. The installation
Wizard should start automatically when you insert the Barco
Display System Installation DVD into your computer's DVD drive. If
The installation dialog will display in English if your operating
system’s language is not supported.