Filter
Top Products
This device com plies with Part 1 5 of the FCC Rules. Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device m ust accept any interference received, inc luding interference that m ay caus e undesired operation of the device.
FCC RF Radiation E xposure Statement: This device is c apable of o perating in 802.11a m ode. For 8 02.11a devices op erating in the
frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to red uce an y potential harmful interference for Mobile Satellite
Services (MSS ) in the US. WIFI Access Points that are capable of allowing your device to op erate in 802.11a mode (5 .15 - 5.25 GHz band)
are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to not
violate federal regulations to protect Mobile Satellite Services.
Base Unit FFC ID: RYK-WPEA-1 21N
Button FCC ID: 2AAED -CLSB TN
Compliance Anatel (Brasil)
1. Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pe la Resolução nº 242/2000, e atende
aos requisitos técnicos aplicados, incluindo os limites de exposição da taxa de absorção específica referente a campos elétricos,
magnéticos e eletromagnéticos de radiofreqüência de acordo com as resoluções nº 303/2002 e 533/2009. Para maiores informaç ões,
consulte o site da Anatel - w
ww.anatel.gov.br
2. Este equipam ento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, m esm o de estações
do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
Canada, Industry Canada (IC) Notices
This device c omplies with Industry Canada licence-exempt RSS standard(s). O peration is s ubject to the following two conditions: (1) this
device may not cause interference, and (2) th is device must accept an y interference, including interference that may cause undesired
operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco
Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
Base Unit IC ID: IC: 410 4 A-AR5BHB116
Button IC ID: 9393B-CLSBTN
IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should
be so chos en that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for su ccessful comm unication.
This radio transmitter 4104 A-AR5BHB 116 has been approved by Industry Canada to operate with the antenna types listed below with
the m aximum permissible gain and required antenna impedance for eac h antenna type indicated. Antenna types not included in this list,
having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this d evice.
Type: Dipole
Maximum Peak Gain: 2 dBi
Impedance: 50 Ohm
Canada, avis d’lndustry Canada (IC)
Le présent appa reil est con forme aux CNR d’Industrie C anada applicables aux appareils radio exem pts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique s ubi, même si le brouillage es t susceptible d’en comprom ettre le fonctionnement.
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil Barco est inférieu re à la limite d’exposition aux fréquences radio d’Industry Canada
(IC). Utilisez l’appareil de sans fil Barco de façon à minimiser les c ontacts humains lors du fonctionnement normal.
IC ID Unité de Base: 4 104 A-AR5BHB116
IC ID Button : 9393B-CLSBTN