Barco R9840171 Projector Accessories User Manual


 
14
Installation setup
Power Connections
The charger
The charger can be fitted with the 4 supplied power plugs:
Changing the plug
1. Pull the plug to be changed upwards untill it is completely removed from the charger (Image 1)
2. Place the plug to be mounted on the charger and guide it downwards by using the guiding
slots (Image 1 & 2)
3. Push the plug downwards untill it clicks and is locked into the charger (Image 3)
4. Check if the plug is well locked, it must not stick out of the charger (Image 4).
Installation Setup
Image 1
Image 2
Image 4
Image 3
1.
2.
3.
4.
1. Australia
2. US/Japan
3. Europe
4. UK