Filter
Top Products
28
Menu 1
Selecting the communication port
To enable one of the communication ports handle as follows:
1. Browse with when in the 'Communication Menu'.
2. Select 'comm.port' and confirm with <ENTER>.
3. Select with <ENTER> (Menu 1).
4. Exit the menu with <EXIT> or <ADJ>.
Menu 1
+
-
NO COMMUNICATION
COMMUNICATION
COM.PORT: [AUTO]
RF enabled
XLR enabled
RS232
XLR
powered?
RF
available?
yes
no
no
yes
When selecting 'AUTO' following priority is set :
Auto enables the XLR port if it is powered.
if not, RF is enabled else RS232/422 is enabled (see flowchart 1)
Flowchart 1
Menu Setup
Changing the baudrate
1. Browse with when in the 'Communication Menu'.
2. Select 'Baudrate' and Confirm with < ENTER>.
3. Select one of the different baudrates with < ENTER> (Menu 1).
4. Exit the menu with <EXIT> or <ADJ>.
Remark: When XLR or RF are enabled, baudrate is fixed at 57600.
NO COMMUNICATION
COMMUNICATION
BAUDRATE [57600]
+
-