Filter
Top Products
23
Frequency band
Sets the frequency band according to the regulations of the country you are working in.
US/EUROPE: Limits the frequency band according to FCC and ETSI regulations.
FRANCE: Limits the frequency band according to French regulations.
SPAIN: Limits the frequency band according to Spanish regulations.
JAPAN: Limits the frequency band to Japanese regulations.
CANADA: Limits the frequency band to Canadian regulations.
Synchronize base
Downloads the RF address and the Frequency band into the wireless base.
The RF address and the frequency band of the remote and the wireless base have to be the
same in order to have a communication link.
To perform the download the remote has to be connected to the wireless base using a standard
serial cable.
The download is performed through the RS232 communication port.
To perform an RF communication following parameters have to be set (see page 29):
RF address
This is a selection of an RF channel for the wireless link.
Any number between 0 and 63 may be chosen.
In the case of multiple wireless links (Image 1 on previous page) each wireless base must have
its own RF address.
Do not uses different receivers with the same address.
image 1
Configuration Setup