Filter
Top Products
1. ScenergiX
1.7 ScenergiX overlap zone (vertical scenergix)
Definitions
Image 1-4
Scenergix overlap zone vertical
Overlap : number of pixels that overlap
Vertical resolution o f 1 projector : 768 for Graphics versions, 1024 for R e ality versions.
Total vertical screen resolution : [(Vertical resolution of
1 projector) x 2] minus (overlap)
Vertical Resolution source : number of active lines of the source
Adjustment of Active lines (Lact) of the first projector
1. Go to File –> Edit menu of first projector.
2. Enter value for vertical → act (= Lact) as follow :
Lact = [(vert.. resolution of 1 projector)/(Total Vert.. screen resolution)] x (Verti. resolution source)
3. Vertical → start (= Lstart) remains the same.
Adjustment of Active lines (Lact) of second projec
tor
1. Go to File –> Edit me nu of second projector.
2. Enter value for vertical → act (= Lact) as follow :
Lact = [(Vert.. resolution of 1 projector)/(Total vert.. screen resolution)] x (vert. resolution so urce)
3. Vertical → start (= Lstart) = original start + [(Vert. resolution s ource) minus (newly calculated Lac t)]
Example
Vertical resolution source : 1200 lines
Vertical resolution 1projector : 768 lines
Overlap : 50 lines
Total vertical screen size : 1486 lines
Lact projector 1 = ( 768 / 1486) x 1200 = 620 lines
Lact projector 2 = ( 768 / 1486/) x 1200 = 620 lines
Lstart projector 2 = Lstart projector 1 + (1200 – 620)
1.8 ScenergiX size adjustment
What can be done with the ScenergiX size menu?
Within this menu the width of the blending zone is set up.
4
R5976464 SC ENE RG IX 14052002