Filter
Top Products
3. Physical Installation of the D320 Lite Digitizer
3. PHYSICAL INSTALLATION OF THE
D320 LITE DIGITIZER
3.1 Installation requirements for the D320 Lite digitizer
Requirements
• The D320 Lite digitizer should not be placed in a built-in installation or enclosure unless proper venti-
lation is provided.
• When using the unit in a multi unit rack assembly or closed assembly, the ambient temperature in
side
the assembly may not exceed the maximum rated ambient temperature of the digitizer. The instal-
lation should be such that the amount of air flow required for safe operation of the equipment is not
compromised.
• When building in the D320 Lite digitizer into a rack with cover door, be aware that a space of minimum
85 mm is needed between the indicated reference and the cover door. This space is needed to guide
the input cables to the inputs.
85 mm
• The D320 Lite digitizer will require that air flows freely in vent holes. Blocking these holes will greatly
reduce the reliability of the unit and lead to the possibility of overheating.
• The D320 Lite Digitizer should operate from an AC power source. The D320 Lite digitizer is equipped
with an auto-ranging power supply from 85 to 264 volt (50–60 Hertz).
• When installed in a rack, the mounting should be such that no hazardous condition is achieved due
to uneven mechanical loading.
• When the mains switch located on the back of the D320 Lite digitizer is not accessible due to rack
mounting, the socket outlet supplying the rack shall be installed near the equipment and be easily
accessible or a readily accessible disconnect device shall be incorporated in the fixed wiring. When
using a rack in an installation it is advisable to log the serial number of the device and to activate the
warranty figure by registering utilizing the included form.
• Do not place the D320 Lite digitizer on an
unstable cart, stand or table. The device may fall, causing
personal injury and serious damage to the digitizer.
• The data path between the D320 Lite digitizer and the LED display may not exceed five (5) meter.
R5976471 D320 LITE DIGITIZER 15/11/2006
9