Filter
Top Products
3. Physical Installation of the D320 Lite Digitizer
3.2 Connections
Rear panel inputs/outputs
A B
C
D
E F
G
H I
Image 3-1
A LED-WALL OUTPUT
B Power Switch
C Power input
D Not used
E Retractable dust filter
F COM1 : RS232 input
G Not used
H Not used
I TCP-IP : Ethernet LAN connector
• A : LED-WALL OUTPUT
- LED wall out (Barco proprietary protocol).
• B : Power switch
- The power ON/OFF switch is provide on the rear side of the Digit
izer.
o
Switchpressedto1=theunitstarts.
o
Switch pressed to 0 = unit totally switched off.
• C : Power input
- Autoranging from 90 to 260 VAC / 130 Watt.
• D:Notused
• F : Retractable dust filter
- The fan intake grill of the Digitizer has a retractable dust filter. This filter can be retracted from the
back of the unit. Check the filter for good functionality on a regular basis. Never allow this filter to
become blocked up and never operate the unit without a good working air filter in place.
• G : COM1 : RS232 input
-Directmaster.
- RS232 input port for communication links with local PC.
• H:Notused
• I : Not used
• J : TCP-IP : Ethernet LAN connector
- For future use.
3.3 Removing and inserting a D320 Lite Digitizer input modul
e
There is no need to switch off the D320 Lite Digitizer to remove or insert an input module.
The input modules are hot swappable.
10 R5976471 D320 LITE DIGITIZER 15/11/2006