Filter
Top Products
3
1. Power OFF both your Mac computer and the monitor.
2. Attach the DB15 male end of the VGA Adapter to the video port
of your Mac. The video port will look like this:
3. Attach the cable of your monitor to the HDDB15 female
end of the VGA Adapter.
4. Set the DIP switches. (See “Setting the Switch Positions”,
on page 5.)
5. Power ON your monitor first, then the Mac.
INSTALLING THE ADAPTER
2
INTRODUCTION
Features
• Connector to allow a Macintosh computer with a DB15 female video
port to connect to a standard VGA, SVGA, or MultiSync® monitor
- Fixed resolution, or multimode, which lets you
change the multimode resolution anytime through
the Mac Control Panel
• VESA resolution support:
640x480
800x600
1024x768
•Mac® resolution support:
512x384
832x624
1132x870
• Quick Reference chart on the back of the Adapter
• Belkin Lifetime Product Warranty
P72551-A_F3H1381-manual.qxd 3/10/03 3:56 PM Page 2