Filter
Top Products
34
Troubleshooting
34
The name of your wireless network DOES NOT appear in the
list of “Available Networks”
If the correct network name is not listed, check the SSID settings
to see if they match. The SSID is case-sensitive and the spelling on
each computer must be exactly the same in order for the Card to
connect to the wireless router or access point.
Note: To check the SSID settings or look for an available network,
double-click the “Signal Indicator” icon to bring up the Belkin
Wireless Network Utility then click on the “Available Networks” tab.
Click on the “Profiles” box if you do not see the network you are
trying to connect to and click “Add”. Then follow the instructions
in “Setting up Wireless Network Profiles” of this manual. For more
information about setting up a SSID please reference your router
manufacturer’s user manual. If issues persist even at close range,
please contact Belkin Technical Support.
Installation CD-ROM does not start Setup Utility
If the CD-ROM does not start the Setup Utility automatically, it
could be that the computer is running other applications that are
interfering with the CD-ROM drive.
If the Setup Utility screen does not appear within 15-20 seconds,
open up your CD-ROM drive by double-clicking on the “My
Computer” icon. Next, double-click on the CD-ROM drive that the
Installation CD has been placed in to start the installation. Then
double-click on the folder named “Files”. Next, double-click on the
icon named “setup.exe”.