Filter
Top Products
1110
INSTALLATION
STANDALONE KVM SWITCH—INSTALLATION
This section provides complete instructions for the hardware setup of a
single KVM Switch (F1DE108B).
Before you begin, determine the type of connection that will be used to
connect the computer to the KVM Switch on each port and select the
appropriate KVM cable.
Connecting Computers to the Switch (PS/2 Connection)
1. Using the OmniView ENTERPRISE Series Dual-Port PS/2 Style KVM
Cable (F1D9400-XX), connect the high-density, 50-pin, SCSI 2-style
connector to the next free KVM port, starting with the port for the first
two computers (for best results, screw the connectors into the KVM
Switch and the server, when possible).
2. Connect the VGA and PS/2 connectors of your KVM cable to the
server (make sure that you connect the keyboard and mouse cables
to the correct ports on your server).
3. Repeat steps 1 through 2 for each additional server you wish
to connect.
INSTALLATION
SPECIFICATIONS
Part No.: F1DE108B
Power: 100-240VAC @ 47–63Hz, single phase
Daisy-Chain: Maximum of 16 BANKs
Max Number of PCs: 8 per BANK (F1DE108B), 128 total
Keyboard Emulation: PS/2 & USB
Mouse Emulation: PS/2 & USB
Monitors Supported: VGA, SVGA, MultiSync, LCD monitors that accept
analog input
Max Resolution: 2048x1536@85Hz
Bandwidth: 400MHz
Keyboard Input: 6-pin miniDIN (PS/2), USB Type-A
Mouse Input: 6-pin miniDIN (PS/2), USB Type-A
Computer Ports: High-density, 50-pin, SCSI 2-style connector
(requires Belkin ENTERPRISE Series Dual-Port KVM
Cable F1D9400-X or F1D9401-XX)
VGA Port: 15-pin HDDB type
Port LED Indicators: 8
Enclosure: Metal enclosure with high-impact plastic faceplate
Dimensions: 17 (width) x 1.75 (height) x 7.5 (length) inches
(431.8 x 44.5 x 190.5mm)
Weight: 9.2 lbs. (4173g)
Operating Temp.: 32° to 104° F (0~40° C)
Storage Temp.: -4° to 140° F (-20~60° C)
Humidity: 0-80% RH, non-condensing
Maximum Altitude: 10,000 feet
Warranty: 5-Year Limited Warranty
Note: Specifications are subject to change without notice.
PS/2 connection
P74042_F1DE108E_man.qxd 5/6/02 10:06 AM Page 10