Filter
Top Products
55
1
2
3
4
5
6
7
8
9
10
section
Using the Switch from a Remote Console
Selecting a Server
The quick-access toolbar allows you to easily select and switch to any server
connected to the Switch or daisy-chain configuration.
To connect to a different server:
1. In the quick-access toolbar, click or right-click . A list of
connected servers will appear (see Fig. 20). If a serial device is connected
to the Switch, it will also appear on the list.
2. Select the desired server or serial device. The screen of the server or the
serial-device window will appear.
Fig. 20 Server-Selection Menu
Note: If security is enabled on the local OSD, remote switching will not be
allowed through the quick-access toolbar.