Filter
Top Products
60
Selecting a Server Using Port Selectors
You can directly select which server you wish to control by pressing the port
selector next to the corresponding port. The LED will illuminate to indicate
the port is currently selected. If you are installing multiple KVM Switches that
are daisy-chained, use the BANK scroll keys located on the front panel of
the primary KVM Switch to access other servers that are connected to the
secondary KVM Switches.
Selecting a BANK Using Scroll Buttons
Pressing the “BANK +” and “BANK –” scroll buttons on the primary KVM Switch
will allow you to switch between the daisy-chained Switches. Pressing both
buttons simultaneously will reset the Switch.
The “BANK +” button will take you to the next BANK. For example, when you
are at the primary switch (BANK 00) and want to check servers on BANK 02,
pressing the “BANK +” button will take you to BANK 02. As a default, the first
active server will be displayed on the console monitor. Use the port selectors to
go to the desired server on BANK 02.
The “BANK –” button will take you to the previous BANK (for example, when you
are at BANK 02 and want to check servers in BANK 01). Pressing the “BANK
–” button will take you to BANK 01. As a default, the first active server will be
displayed on the console monitor. Use the port selectors to go to the desired
server on BANK 01.
Using the Switch from a Local Console