Filter
Top Products
71
1
2
3
4
5
6
7
8
9
10
section
Local Console
General
Problem:
My server does not boot when connected to the Switch but works fine when
I connect the keyboard, video, and mouse directly to the server.
Solution:
• Make sure that the keyboard and mouse cables are connected tightly between
the Server Interface Module and the server.
• Check that the keyboard and mouse cables are not crossed.
• Check the CAT5 cable connection.
Video
Problem:
I am getting ghosting, shadowing, or fuzzy images on my local monitor.
Solution:
•
Check that all video cables are inserted properly to the Server
Interface Module.
•
Check that the monitor you are using supports the resolution and
refresh-rate setting on your server.
•
Lower the video resolution of your monitor.
•
Check that the cable length does not exceed 100 feet (30m).
•
Check that the graphics card you are using supports the resolution and
refresh-rate setting on your server.
•
Connect the monitor directly into the server with which you are having trouble
to see if the problem still appears.
Problem:
I am getting a black screen on my local monitor.
Solution:
•
Check that all video cables are inserted properly.
•
Check that the keyboard cable is connected and inserted properly between
the server and the Server Interface Module for the appropriate port.
•
Connect your monitor directly to the server to verify that your monitor is
functioning properly.
Troubleshooting