Belkin F1DS104U Switch User Manual


 
3
OVERVIEW
Direct-Access Port Selectors
Direct-access port selectors, conveniently located on the front face of the
KVM Switch, allow for simple, manual port selection.
Cable Management
The designed enclosure offers built-in cable management to contain
connected cables. Once the cables have been connected and the shroud
slid into place, the cables are conveniently maintained through the
back opening.
LED Display
An LED display is added to the face of the KVM Switch for easy status
monitoring. A lit LED indicates which computer the console has control
of. The corresponding direct-access port selector is located next to the
LED. When pushed, the LED should light next to the port selector.
USB Device Ports
Two USB device ports allow you to add shared peripherals. This reduces
cable clutter and eliminates the need to disconnect and reconnect
devices when switching between computers.
Feature Overview
The OmniView SOHO Series USB KVM Switch with Audio (the KVM Switch)
allows you to control up to four computers, with one USB keyboard and
USB mouse and a VGA, SVGA, XGA, or XGA-2 video monitor.
USB Hot Keys
Hot keys allow you to select ports using designated key commands from
your USB keyboard. Control up to two (for the 2-port unit) or four
(for the 4-port unit) computers, using a simple hot key sequence on
your keyboard.
AutoScan
The AutoScan feature allows you to automatically scan and monitor the
activities of all operating computers connected to your KVM Switch, one
by one.
Video Resolution
With a 400MHz bandwidth, the KVM Switch supports video resolutions of
up to 2048x1536@85Hz. To preserve signal integrity at high resolutions,
75-Ohm coaxial VGA cabling is required.
Flash Upgrade
Flash upgradeability allows you to obtain the latest firmware upgrades for
your KVM Switch. These upgrades will let your KVM Switch continue to be
compatible with the latest devices and computers. Firmware upgrades are
free for the lifetime of the product. Visit belkin.com for upgrade
information and support, or see the enclosed instruction document.
Microphone/Audio Support
The KVM Switch supports USB-type speakers and microphones and has
built-in microphone and speaker jacks to support the growth of
multimedia use in small-office and home-office environments. This feature
eliminates the need to disconnect and reconnect these devices when
switching between computers, and reduces the clutter on your desktop
with fewer speakers.
OVERVIEW
2