Filter
Top Products
18
Web Configuration
Web Configuration
19
section
2
1
3
4
5
6
7
8
9
10
Web Interface – Print Server Configuration
This menu allows the user to modify the following parameters:
• Print Server Name: This field identifies the Print Server by name,
and each Print Server has a unique name. Unique names are
critical in a network with more than one Print Server. If the user
wishes to change the name, make sure to use unique names.
• Raw Printing: This feature allows clients to print to the Print
Server using the standard TCP/IP printer port built into Windows
XP and 2000 instead of the Belkin Port Monitor. Using Raw
Printing requires the user to configure all port parameters
manually and is not recommended for users unfamiliar with TCP/
IP printing.
• FTP Printing: This feature enables the printer to receive print jobs
sent by FTP (see FTP Printing for detailed instructions). Disabling
this feature will prevent FTP jobs.
Web Interface – Upgrade Firmware
This menu allows the user to upgrade the Print Server’s firmware. Before
running this application, download the new firmware from the Belkin website at
www.belkin.com. Be careful to take note of the location of the downloaded
file on your computer’s hard disk. After downloading, click “Browse” on the