Filter
Top Products
CONNECTING AND CONFIGURING YOUR CABLE/DSL GATEWAY ROUTER
3.4 Connect the new network cable from the back of the computer to one of
the ports labeled “1–4”.
NOTE: It does not matter which numbered port you choose.
3.5 Turn on your cable or DSL modem by reconnecting the power supply to
the modem.
3.6 Before plugging the power cord into the Router, plug the cord into the wall,
then plug the cord into the Router’s power jack.
3.7 Verify that your modem is connected to the Router by checking the lights on
the front of the Router. The green light labeled “WAN” should be ON if your
modem is connected correctly to the Router. If it is not, recheck
your connections.
3.8 Verify that your computer is connected properly to the Router by checking
the lights labeled “LAN 1,2,3,4”. The light which corresponds to the
numbered port that you connected your computer to should be ON if your
computer is connected properly.
Computer that was originally
connected to the cable or
DSL modem
To power
adapter
Cable or
DSL modem
New network cable
(to computer)
Existing network cable
(that came with modem)
12