Belkin F5D5231-4 Network Router User Manual


 
23
ALTERNATE SETUP METHOD
Step 4: Configuring your Router for Connection to your ISP
The “Internet/WAN” tab is where you will set up your Router to connect to your
Internet Service Provider. The Router is capable of connecting to virtually any
Internet Service Provider’s system provided you have correctly configured the Router’s
settings for your ISP’s connection type. Your ISP connection settings are provided to
you by your ISP. To configure the Router with the settings that your ISP gave you,
click “Connection Type” (A) on the left side of the screen. Select the connection
type you use. If your ISP gave you DNS settings, clicking “DNS” (B) allows you to
enter DNS address entries for ISPs that require specific settings. Clicking “MAC
address” (C) will let you clone your computer’s MAC address or type in a specific
WAN MAC address, if required by your ISP. When you have finished making settings,
the “Internet Status” indicator will read “connection OK” if your Router is set
up properly.
(A)
(B)
(C)