Belkin F5D5231-4 Network Router User Manual


 
61
4. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see “Manually”
or “Using DHCP”. If you do not, check the PPPoE tab (5) to make sure that
“Connect using PPPoE” is NOT selected. If it is, you will need to configure your
Router for a PPPoE connection type using your user name and password.
5. If “Manually” is selected, your Router will need to be set up for a static IP
connection type. Write the address information in the table below. You will need
to enter this information into the Router.
6. If not already selected, select “Using DHCP” next to “Configure” (4), then click
Apply Now”.
Your network settings are now configured for use with the Router.
MANUALLY CONFIGURING NETWORK SETTINGS