Filter
Top Products
29
Using the Belkin Wireless Client Utility
29
section
1
2
3
4
5
6
(g) SSID
The network name of the router or access point.
(h) BSSID
This column will display the router or access point’s MAC address.
(i) Signal Quality
The signal strength of the related router or access point.
(j) Encryption
Will display “None” when encryption is disabled, “WEP” when either
64-bit or 128-bit encryption is enabled.
(k) Transmit Data Rate
This displays the transmit rate from the router to the Card.
(l) Receive Data Rate
This displays the receive rate from the router to the Card. The receive
data rate may fluctuate as the Card is transmitting data.
(m) Transmitted Bytes
This displays the bytes that have been transmitted.
(n) Received Bytes
This displays the bytes that have been received.
(o) Band
This displays the frequency band the network is using.
(p) Channel
This displays the channel the network is on.
(q) Authentication
Displays the authentication settings the network is using.
(r) Encryption
Will display “None” when encryption is disabled, “WEP” when either
64-bit or 128-bit encryption is enabled.
(s) Power Consumption
This displays the power consumption settings the Card is
currently using.