Filter
Top Products
Hardware Installation
3
Because USB is hot swappable, you need not power down
your PC.
• Connect the jack of the power adapter and plug it into the
back of the Multi-port Hub
• Find an unused electrical outlet, and plug in the power adapter
• Plug the flat end (A plug) of the USB cable into a free USB
port on your PC
• Plug the square end (B plug) of the USB cable into the USB
upstream connector located on the back of the Multi-port Hub
Windows
®
will automatically detect the Multi-port Hub and start
installing its drivers. Windows will prompt you for the software.
See the next sections for details on how to install the software.
Before you can install the software, you need to know what
version of Windows
®
you are using. If you are not sure what
version of Windows
®
you are running, click on START, select
SETTINGS, click on CONTROL PANEL, then double-click on
SYSTEM. An applet will appear and provide you with your
system’s information.