Filter
Top Products
6
7
ID Setup
section
1
2
3
4
5
6
1. Aim the front point of the mouse at the receiver.
2. IMPORTANT: FIRST, PRESS THE CONNECT BUTTON
OF THE MOUSE; THEN PRESS THE CONNECT BUTTON
OF THE RECEIVER (fig. 5). NEVER REVERSE THIS
PROCEDURE.
3. When the connect button of the receiver is pressed, the
LED inside the receiver willlight. As soon as the linkage is
completed, the LED will go off.
4. The setup must be completed within one minute. If setup
time exceeds one minute, repeat procedure.
P74810ea_F8E825veaUSB_man.indd 7 15/2/05 4:35:07 pm