Belkin N300 Network Router User Manual


 
48
INTERNET
Point-to-Point Tunneling Protocol (PPTP)
WAN Interface Type Select whether the ISP is set to Static IP or will allocate a Dynamic IP address.
Hostname This is optional. Only required if specified by ISP.
MAC address The MAC Address that is used to connect to the ISP.
Username Username assigned to you by the ISP.
Password Password for this username.
Service IP Address The IP Address of the PPTP server.
Connection ID This is optional. Only required if specified by ISP.
MTU
The maximum size of packets.
Do not change unless mentioned by the ISP.
Type
You can choose the method that the router maintains a connection with the ISP.
Keep Connection: The device will maintain a constant connection with the ISP.
Automatic Connection: The device will only initiate a connection to the ISP when there is
an Internet connection request made from a LAN device.
Manual Connection: The user will need to manually connect to the ISP by clicking the Connect button.
Idle Timeout:
When the connection type is Automatic Connection, when Internet traffic is
idle, then the device will automatically disconnect from the ISP.
Please specify the Idle time in minutes.