Filter
Top Products
Keyboard Hot-Key commands:
To send commands to the OmniCube
™
, the SCROLL LOCK key must be
pressed twice within 2 seconds. You will hear a beep for confirmation. Below
are the different commands:
: Switch to Port 1 : Switch to Port 2
: Switch to Port 3 : Switch to Port 4
: Switch to previous port : Switch to next port
: Enables AutoScan mode.
In AutoScan mode, the OmniCube
™
remains on one port for 10 seconds before
switching to the next. There is no mouse or keyboard control in this mode.
This is necessary to prevent errors. Otherwise, if the user is moving the mouse
or using the keyboard when the OmniCube
™
switches to the next port, data
flow is interrupted and will cause erratic mouse movement and/or the wrong
characters to show up when using the keyboard.
To get out of AutoScan mode, hit the SPACEBAR.
OmniCube
™
4-Port
CONSOLE
F1D094
12 34 Select
10
Usage
Selecting which computer to operate can be done either by pressing the
SELECT button, or through keyboard hot-key commands. You will notice that
after the OmniCube™ switches to another computer, the mouse will be
inoperative for about 1-2 seconds. This is normal operation and ensures that
proper mouse synchronization is established.
Pressing the SELECT button cycles
you through ports 1 - 4.
Scroll
Lock
Scroll
Lock
3
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
0
Scroll
Lock
Scroll
Lock
4
Scroll
Lock
Scroll
Lock
Scroll
Lock
Scroll
Lock
1
Scroll
Lock
Scroll
Lock
2