Filter
Top Products
Windows
®
98 Installation Instructions
5
4
WINDOWS
®
98 INSTALLATION:
1. Connect your SCSI device or device chain to the
USB SCSI Adapter. See appendices for adapters and
cables you may need. Make sure that the device(s) are
powered up.
2. Plug in the USB SCSI Adapter to a free USB port on
your computer, or USB Hub. A “New Hardware
Found…” dialog box will appear.
3. Click “Next”.
Note: Even if the Adapter is plugged into your USB
port (or Hub), it must first be plugged into a SCSI
device that provides termination power before
Windows will detect and enumerate the Adapter
and the SCSI device(s). If your SCSI device(s)
does not provide termination power, contact
Belkin to purchase the optional AC Adapter
(part# F5U115xPWR).
Note: If you unplug the USB SCSI Adapter from the
computer, or the device(s) from the SCSI chain,
the operating system may not recognize this and
might think that the device(s) are still connected. In
the event that the device(s) and/or the USB SCSI
Adapter is unplugged from the computer and an
application tries to access the device(s), your
computer will hang. You must restart your computer
in order to recover from this error.
Hence, to disconnect a device from the SCSI chain,
always drag its icon to the TRASH first, then
disconnect the USB SCSI Adapter or devices.
Macintosh
®
Installation and Usage (continued)