Filter
Top Products
2120
Using the Web-Based Advanced User Interface
2120
Using the Web-Based Advanced User Interface
reside in. The default channel is 11 (unless you are in a country that
does not allow channel 11). The channel can be changed if needed. If
there are other wireless networks operating in your area, your network
should be set to operate on a channel that is different than the other
wireless networks. For best performance, use a channel that is at least
five channels away from the other wireless network. For instance, if
another network is operating on channel 11, then set your network to
channel 6 or below. To change the channel, select the channel from
the drop-down list. Click “Apply Changes”. The change is immediate.
Note: When using the WURE in “Wireless Repeater Mode,” the
channel of your WURE must match the channel of your parent access
point. For easy configuration, set the channel of your WURE to “Auto”.
Change the channel of the parent access point. The channel or the
WURE will automatically match the parent access point.
Using the Broadcast SSID Feature
Note: This advanced feature should be employed by advanced
users only.
For security, you can choose not to broadcast your network’s SSID.
Doing so will keep your network name hidden from computers that
are scanning for the presence of wireless networks. To turn off the
broadcast of the SSID, remove the check mark from the box next